Rover 19A70052OEM Manual Del Operador página 4

Thank You
Thank you for purchasing a bagging attachment. It was carefully engineered to provide excellent performance when properly operated and maintained.
Please read this entire manual prior to operating the equipment. It instructs you how to safely and easily set up, operate and maintain your equipment. Please be sure that you, and any other persons who will
operate the machine, carefully follow the recommended safety practices at all times. Failure to do so could result in personal injury or property damage.
All information in this manual is relative to the most recent product information available at the time of printing. Review this manual frequently to familiarize yourself with the equipment, its features and
operation. Please be aware that this Operator's Manual may cover a range of product specifications for various models. Characteristics and features discussed and/or illustrated in this manual may not be
applicable to all models. We reserve the right to change product specifications, designs and equipment without notice and without incurring obligation.
If you have any problems or questions concerning this equipment, phone your local dealer or contact us directly. We want to ensure your complete satisfaction at all times.
right
Throughout this manual, all references to
List of Contents - 19A70052OEM
Before beginning installation, remove all parts from the carton to make sure everything is present. Carton contents are listed below and shown in Figure 1. The hardware
pack(s) included in this kit are detailed at the end of this section.
• Boot - 731-12346
• Window (Included with Hood Assembly) - 731-12348D
• Grass Bag Assembly (2) - 664-05104
• Vertical Support - 683-04519C
• Hanger Assembly - 683-05329A
• End Plugs (4) - 735-0246A (pre-installed)
• Hood Assembly - 631-05474B
• Upper Chute Support - 631-05491B
• Left Grass Catcher Cover - 731-12350B
• Hose - 764-05082
• Lower Hose Connection - 731-12353A (pre-installed)
CONTENTS OF CARTON
left
and side of the machine are observed from the operating position.
• Hinge Pin - 711-06701
• Universal Bracket - 783-06168
• RZT Bagger Weight - 719-04271A
• Weight Mounting Bracket - 703-11046
• Weight Mounting Bracket (2) - 703-11112
• Weight Hanger Bracket Left - 703-10951
• Weight Hanger Bracket Right - 703-10952
• Hardware Pack - 689-00567
• Hardware Pack - 689-00569
• Bagger Boot Hardware Pack - 689-02419
Figure 1
4