Rover 19A70052OEM Manual Del Operador página 8

Bagger Usage
NOTE: When both grass bags are full, place the tractor on a firm, level surface, disengage
the PTO, turn the tractor engine off and set the parking brake.
Open the grass catcher hood by pushing in on the rear, right-side tab with your
right hand, as seen in (1) of Figure 18, and lifting the cover with your left hand in the
center rear of the bagger cover (2).
1. Do not remove the hose assembly from the tractor.
2. Remove the grass bags by lifting these up (1) and moving the bags away
from the bag support assembly (2). See Figure 19.
3. Empty the grass clippings at a proper disposal site, use the handle at the
bottom of each grass bag. Holding the bag firmly, empty the contents.
4. Replace grass bags, close lid, flip down seat, restart your tractor, release
parking brake and resume cutting your grass.
OPERATION
Figure 18
Figure 19
8
1