NuWave INFINITY 28202 Manual Del Propietário página 5

IMPORTANT SAFEGUARDS
HOUSEHOLD USE ONLY • READ ALL INSTRUCTIONS BEFORE USE
SAVE THESE INSTRUCTIONS
Read and understand the entire manual before using the
Infinity Blender.
™
DO NOT USE THE INFINITY BLENDER
THAN ITS INTENDED USE.
Note: Put the Infinity Blender on a surface that is horizontal, even,
™
and stable. This appliance is intended for normal household use. It
is not intended to be used in environments such as staff kitchens/
cafeterias of shops, offices, farms, or other work environments,
nor is it intended to be used by clients in hotels, motels, bed and
breakfasts, and non-residential environments.
NOTICE: THE FAILURE TO FOLLOW ANY OF THE IMPORTANT
SAFEGUARDS, ADDITIONAL SAFEGUARDS, OR THE
INSTRUCTIONS FOR SAFE USE IS A MISUSE OF YOUR
INFINITY BLENDER THAT CAN VOID YOUR WARRANTY AND
™
CREATE THE RISK OF SERIOUS INJURY.
WARNING
In case of malfunctions, immediately unplug and contact
Customer Service Department 1-877-689-2838 (Mon - Fri
7:30am to 4:30pm CST) • help@nuwavenow.com
1. Do not place the Infinity Blender close to flammable materials,
™
heating units, or wet environments.
2. It is normal for some smoke to escape the Infinity
when blending for the first time.
3. If a lot of smoke is escaping from the air vent during
operation, unplug the Infinity
™
contact Customer Service.*
4. DO NOT remove the blades in any way or attempt to remove
for cleaning.
5. Extreme caution must be exercised when operating the Infinity
Blender or any other appliance.
™
6. Do not move the Infinity Blender while in operation. Only after
™
the Infinity Blender has finished blending and has completely
™
cooled should moving be attempted. Always wait for the
Infinity Blender to cool down prior to handling it.
™
8
important safeguards
FOR OTHER
™
Blender
™
Blender immediately and
7. Children should be supervised to ensure that they do not play
with the Infinity Blender.
™
8. If any trouble arises during operation, service MUST be done
by NuWave LLC or authorized by the manufacturer for repairs.
®
9. Do not disassemble the Infinity
without prior written consent from the manufacturer.
10. Do not use metal utensils as this can damage the Jar.
11. Make sure the Infinity Blender is always clean prior to use.
™
12. Turn power off and unplug Infinity
touching movable parts or reaching in with a utensil. Turn
power OFF and unplug when Infinity
13. Do not operate Infinity Blender if abnormal sounds or motion
™
is detected. If a hard or foreign object comes into contact with
blades in Jar, do not serve.
14. Inspect the Infinity Blender's blade assembly after each
™
use, and if there are loose, damaged, or missing parts,
contact Customer Service at 1-877-689-2838 or email help@
nuwavenow.com.
15. Always use extreme caution when inspecting or maintaining the
Infinity Blender or any appliance.
™
16. The Infinity Blender is not intended to be operated by means
™
of an external timer or separate remote-control system.
*Customer Service Department: 1-877-689-2838 (Mon - Fri
7:30am to 4:30pm CST) • help@nuwavenow.com
CAUTION
Never use the Infinity Blender's blade assembly with loose,
™
damaged, or missing parts.
Blender or replace any parts
™
Blender blender BEFORE
™
Blender is unattended.
™
9
nuwavenow.com