Cleaning & Maintenance - NuWave INFINITY 28202 Manual Del Propietário

INSTRUCTIONS
The display will show the default time for the function you have
•
selected. Once the button is released, blending will end.
The percentage of power used can be adjusted by holding
•
Pulse 1 and rotating the dial.
The percentage will change in 10% increments. Hold the Up
•
and Down buttons to move percentage points faster.
Press Pulse 2 for short bursts of blending at high power (100%
2.
Power).
Press and hold Pulse 2 for continuous blending. Once the
•
button is released, blending will end.
The display will show the default time for the function you have
•
selected. Once the button is released, blending will end.
The percentage of power used can be adjusted by holding
•
Pulse 2 and rotating the dial.
The percentage will change in 10% increments. Hold the
•
Up and Down buttons to move
percentage points faster.
Icon Settings
For more specialized blending tasks you
can select one of the preset icons with
the dial. Each icon setting has a default
time and RPM built into your Infinity
Blender.
Turn the dial to your desired icon
1.
setting. The LED display will show
the default time.
Adjust the time, if needed, then press Start/Pause to begin
2.
blending at your selected setting.
If desired, increase or decrease time at any point while
•
blending.
*Notes:
When blending for a long period of time, steam may escape from
•
Plunger Cap.
Always start with cold liquids when blending. DO NOT add hot
•
liquids to the blender.
Do not fill the Jar above ¾ capacity. For best results, do not fill
•
more than 1.5 liters (51 fl oz) of liquid.
16
instructions
0
™
Time
Start
Pulse Pulse
1 2 Pause
CLEANING & MAINTENANCE
Default
Icon
Min. : Sec.
1-10* 03:00
Ice 00:15
0
0
Smoothie 00:35
Sorbet 00:30
Nuts
01:30
Soup
03:00
Clean**
00:15
**Tips for Cleaning Your Infinity
Add water and 1-2 drops of liquid dish soap to your Jar, place on
•
the Base, and close the Lid.
1 2
1 Turn the dial to Clean. 00:15 will be displayed. Adjust the time, if 2
•
desired, then press Start/Pause.
Once finished, remove the Jar, rinse thoroughly, and dry before
•
using.
For detailed instructions on cleaning your Infinity
see Cleaning and Maintenance.
Moving parts may become hot with extended use.
DO NOT TOUCH.
The power cord needs to be unplugged from the power
source before inserting or removing any parts or
attachments and before cleaning.
Min. Max.
Notes
Sec. Min.
00:05 05:00 Adjustable speed
00:05 02:00 Ice-based drinks
00:05 02:00 Frozen drinks
00:05 02:00 Frozen desserts
00:05 02:00 Jams and spreads
Soup and hot
00:05 05:00
chocolate
00:05 02:00 Self-cleaning
Blender Jar:
™
Blender
™
CAUTION
CAUTION
nuwavenow.com
17