How To Upgrade The Router's Firmware; How To Restore Factory Defaults - Linksys EA2750 Guia Del Usuario

4. Under Router configuration, click Restore. The Restore Router Configuration dialog box
opens.
5. Click Choose File to navigate to the location of your configuration file, then select the file and
click Open.
6. To restore the configuration, click Start to Restore.

How to upgrade the router's firmware

Linksys may periodically publish a firmware upgrade either to fix a problem or to add features to your
router.
Important—Do not interrupt the upgrade process. You should not turn off the router or press the
Reset button during the upgrade. Doing so may permanently disable the router.
Tips—Your router automatically checks for available updates and installs them by default. Use the
following instructions only if the automatic firmware update has been turned off.
To upgrade the router's firmware:
1. Log in to Linksys Smart Wi-Fi. (See ''How to connect to Linksys Smart Wi-Fi'' on page 10.)
2. Under Router Settings, click Connectivity.
3. Click the Basic tab.
4. Under Firmware Update, click Check for Updates.
5. If an available update is found, follow the on-screen instructions to install it.
Tip---- - To have your router automatically check for updates and install them, select
under Router Firmware Update.

How to restore factory defaults

If you've tried previous troubleshooting steps and your network still doesn't work, you may need to
restore your router's factory defaults. To restore your router to factory defaults, you can use the
Reset button on the router or use Linksys Smart Wi-Fi.
To reset your router using the reset button:
CAUTION—Whenever you restart the router, all logs that are not saved will be lost.
With your router connected to power and turned on, press and hold the Reset button on the
•
back of your router until the power indicator flashes.
To reset your router to factory defaults using Linksys Smart Wi-Fi:
1. Log in to Linksys Smart Wi-Fi. (See ''How to connect to Linksys Smart Wi-Fi'' on page 10.)
2. Under Router Settings, click Troubleshooting.
Automatic
59