Ecor Pro EPD330LGR Manual Del Usuario página 12

en
Humidistat Mode
Press MENU SELECTION to adjust the set value from
CO-35%-40%-45%-50%-55%-60%-65%-70%-75%-80%-85%-
90%. Choose the desired value and wait for 5 seconds, the
setting will be kept.
CO means continuously dehumidifying.
Temp Units
Shows the current temperature scale. Press MENU
SELECTION to select Fahrenheit or Centigrade scale.
Coil Temp
Shows the evaporator coil temperature.
Comprss Current
Shows the current in amps.
If the unit can not detect the compressor current, the
display shows - - A.
Code Message
If the unit on-board diagnostics discover a problem, the
unit will display an error message, see the Code Message
next page.
12