The Machine And The Pellets; Components Of The Appliance - klover WAVE 90 Instrucciones De Uso

CS.W110.IST-1 / Rev 1.3

THE MACHINE AND THE PELLETS

Components of the appliance

The appliance is delivered with the following equipment:
- No. 1 - User, installation and maintenance guide;
- No. 1 - Power supply cable;
- No. 1 - Front heat exchanger cleaning hook;
- No. 1 - Remote control.
The images below are purely indicative and show some details of the Wave model:
Anti-interference filter
Main switch, connection for
power supply cable with 2 built-in
fuses (4A 250V).
Insert locking knobs.
Support
panel.
Pellet reserve
sensor.
Flue gas
outlet.
3
ENGLISH
Front heat exchanger
cleaning hook.
Safety thermostat
with manual reset.
Pellet loading tray.
Micro-switch
to close the door.
Wi-Fi information
(MAC address and
registration code).
T.ROOM terminal Room
thermostat connection.
T.ROOM terminal 1
Connection of ducted room
1 thermostat or ducted
room 1 probe.
Ducted air outlet.
Intake pipe.