Publicidad
Idiomas disponibles
Idiomas disponibles
120 VAC
POWER CABLE ENTERING THE HOOD
Install 2 included rocker switches at a convenient place for the
user. Use two 14/2 cable to wire it to the range hood (see diagram
at right).
Range hood series:
BUEZ0, BUEZ1, BUEZ2, BU2, BXT1,
40000, F40000, 41000, 42000, NU2 and RL62000.
NOTE:
Use appropriate wire nuts for all connections.
Insert both 14/2 cable coming from switches in the hood through
an UL approved wire clamp. Insert 120 VAC house wiring in the
hood through another UL approved wire clamp. With a short
ground wire (not provided), connect all ground wires together as
shown below. Connect the other end of the short ground wire to
the GREEN ground screw.
Connect BLACK wire from no. 2 14/2 cable to BLACK wire from
120 VAC house wiring.
Connect WHITE wire from no. 2 14/2 cable to BLACK wire cut
from light switch.
Connect WHITE wire from 120 VAC house wiring to WHITE
wire from blower connector and WHITE wire coming from light
socket.
Connect BLACK wire from no. 1 14/2 cable to RED wire cut from
blower switch.
Connect WHITE wire from no. 1 14/2 cable to BLUE wire cut
from blower switch.
4
2
120 VAC
HOUSE WIRING
NO. 2
14/2 CABLE
Once all the connections are done, finalize the installation by reversing steps
NOTE: Be careful while reinstalling the wiring cover to the hood.
5
6
1
NO. 1
14/2 CABLE
WHITE
COM
BLACK
Motor speed
selection switch
14/2 CABLE
TO HOOD
Range hood series:
NOTE:
Use appropriate wire nuts for all connections.
Insert both 14/2 cable coming from switches in the hood through
an UL approved wire clamp. Insert 120 VAC house wiring in the
hood through another UL approved wire clamp. With a short
ground wire (not provided), connect all ground wires together as
shown below. Connect the other end of the short ground wire to
the GREEN ground screw.
Connect BLACK wire from no. 2 14/2 cable to BLACK wire from
120 VAC house wiring.
Connect WHITE wire from no. 2 14/2 cable to BLACK (or BLUE)
wire cut from light switch.
Connect WHITE wire from 120 VAC house wiring to WHITE wire
from blower connector.
Connect BLACK wire from no. 1 14/2 cable to BLACK wire cut
from blower switch.
Connect WHITE wire from no. 1 14/2 cable to RED wire cut from
blower switch.
2
120 VAC
HOUSE WIRING
NO. 2
14/2 CABLE
to
on first page.
3
BLACK
WHITE
GROUND
NO. 1
NO. 2
14/2 CABLE
TO HOOD
BUEZ3 and 43000.
4
5
6
NO. 1
14/2 CABLE
On/Off
motor switch
On/Off
light switch
1
Publicidad
