FONESTAR SCF-550 Manual Del Usuario página 3

17.- EFX IN/OUT: input connectors (EFX IN) and output (EFX OUT), 6.3 mm jack. Connect the input of an
external effects processor or similar device to send EFX OUT and the output of the effects processor to
send EFX IN to add external effects to the audio signal.
18.- DELEGATES: 4 input lines for president and delegate microphones. A maximum of 30 microphones
can be connected in each line and up to 64 microphones in total.
19.- DATA: function not available.
20.- SPEAKER: amplified loudspeaker output 2 x 50 W RMS, for the connection of low impedance
loudspeakers 4-16 Ω.
21.- Socket for AC power supply connection.
22.- Power supply voltage selector.
PRESIDENT MICROPHONE AND DELEGATE MICROPHONE
SCF-560P
1.- PRIOR: by pressing this button, all the delegate microphones are automatically cut off giving priority to
the president microphone.
2.- ON/OFF: press this button once to activate the microphone, a second time to deactivate it. While the
microphone is active, the speaker can speak (microphone LED ring lit).
3.- Connector for gooseneck microphone.
4.- Microphone loudspeaker monitor.
5.- Socket for interconnection of system microphones, DIN 8 connector.
6.- Headphone output, 3.5 mm jack connector.
7.- MIC: microphone input, 3.5 mm jack connector. To connect the tie-clip microphone included in the
president microphone mod. SCF-560P.
REC OUT: recording output, 3.5 mm jack connector. Only available in the mod. SCF-570D.
8.- Microphone volume control.
- 3 -
EN
SCF-570D