KSIX LCAUTWMINI02B Manual Del Usuario página 2

USER GUIDE
CONNECTION
ON/OFF
After opening the charging case, the earphones will turn on automatically.
Put the earphones into the charging box and close it for shutting down the earphones.
Pairing
After being taken out from the charging case, the earphones will turn on automatically.
Turn on the smartphone's Bluetooth and search the Bluetooth device TWINS PRO. Then,
click "Connect". A voice prompt saying "Connected" will sound once the connection is
completed.
HOW TO USE
- Play/Pause: touch the left or right earphone once gently to play or pause the music.
- Volume: touch twice gently the left earphone to decrease the volume. Touch twice
quickly the right earphone to turn up the volume.
- Previous/Next song: touch three times gently the left earphone to decrease the
volume. Touch three times quickly the right earphone to turn up the volume.
- Answer/Hang up a call: touch the left or right earphone once to answer the call.
Touch again the left or right earphone to hang up.
- Reject a call: touch the left or right earphone for 2 seconds to reject the call.
- Voice assistant: touch the left or right earphone for 3 seconds to active the voice
assistant.
CHARGE
Charge the case completely before using the earphones for the first time.
Charging case
a) Use the type-c charging cable included in the box to charge the case.
b) The 4 LED blue lights in the case indicate the charge level:
• LED1 flashing: charge level <25%
• LED1 always on + LED2 flashing: charge level 25% ≤ 50%
• LED1 y LED2 always on + LED3 flashing: charge level 50% ≤ 75%
• All LED lights always on: fully charged 90% - 100%
Earphones
When the battery is running low, you will receive a warning sound and the red LED will
flash. The earphones will turn o once the battery will run low completely. In this case:
a) Put the earphones in the case.
b) When charge starts, a red LED will be activated and turned o once charge is
completed.