Electrical Installation; Pre-Installation - DURAVIT 791851 Instrucciones De Montaje Y Uso

Electrical installation

Power supply
Protection type
Rated power
Circuit breaker
RCCB

Pre-Installation

> Installing a permanent power supply line:
Install a separate circuit breaker and
residual-current circuit breaker (RCCB)
upstream
Connect an all pole disconnector mains
switch upstream located outside the speci-
fied protection zones (0 - 2)
Leave 3000 mm of feed cable exposed
> Laying equipotential bonding cables:
Leave 3000 mm of cable exposed
First install the bathtub and
NOTICE
connect the waste water and
then carry out the electrical
installation.
I Connecting sound
Avoid any malfunctions!
NOTICE
Do not fasten the cables together with
cable ties.
Do not install the supply line parallel to
the control cables.
> Connect the supply line to the mains
supply socket.
II
Connecting the equipotential bonding
Connect the potential equalisation cable to
the bathtub.
220-240 V ~ 50/60 Hz
IPX5
max. 80 W
I
= 16 A
N
I 30 mA
N
Safety areas in accordance with
DIN VDE 0100-701
0
6 0
1
0
I
II
6 0
0
* or the
height of the
highest shower
2
head / water
outlet that is
permanently
installed,
depending on
which is higher
P E
N
L
ZU_M_Sound/15.12.4
9