Prolux Multi Fit Wheel Heavy Duty Basic Manual De Instrucciones página 15

Original operating instructions – ProLux Multi Fit Wheel Heavy Duty Basic / Premium 16 / Premium 17
7. Tighten the wheel bolts in a crosswise manner step by step and make sure that the adapter is centred.
The bolts must be tightened to the torque specifi ed by the vehicle manufacturer and must engage in the hole by
at least 5 full turns.
8. After tightening with the prescribed torque, check the wheel hub for free movement. To do this, turn the
wheel hub by hand and make sure that no grinding noises or blockages are caused by wheel bolts that
may be too long.
9. After mounting the adapter, the ProLux Multi Fit Wheel can be installed.
The ProLux Multi Fit Wheel is always fi xed with the Multi-Fit wheel nuts.
- Tightening torque of the wheel nuts:
- Air pressure of the ProLux Multi Fit Wheel: 4.2 Bar.
- Minimum tread depth:
- Maximum permitted speed:
- Maximum permitted driving distance:
- Maximum load capacity:
100 Nm.
1.6 mm.
80 km/h
100 km
530 kg (16"), 710 kg (17")
English
15