IN&MOTION IN&BOX Manual De Instrucciones página 18

This corresponds to approximately 1 week of autonomy
in normal use (daily commute*).
IN&MOTION recommends switching off your In&box with
the central button when it is not being used for several
consecutive days.
* Around 3h riding per day and "automatic standby" mode the rest of the day.
#2 TURN ON YOUR IN&BOX
Quickly press twice on the
central button to turn on or
off the In&box
#3 IN&BOX ACTIVATION MODES
The In&box has two different activation modes:
1. Activation using the ON/OFF central Button
Turn your In&box on and off without removing your In&box
from its position by double clicking quickly on the central
button.
USB-C cable USB charger
(provided) (not provided)
In case of problem, activate
the Reset button by pressing
it for 5 seconds
32
Make sure to turn your In&box off
when using any other transportation.
2. Automatic standby mode
Thanks to this function, your In&box will switch to standby
mode automatically if it remains motionless for more than
5 minutes. When the In&box detects motion, it turns on
automatically eliminating the need to turn it on or off!
However, the In&box must be placed on a completely
motionless stand.
Make sure to turn your In&box off when using any
other transportation (car, bus, airplane, train or using a
motorcycle but not wearing the airbag system).
#4 LIGHTING CODE
Below is a list of different LED colours that you may see on
your In&box.
Warning, this lighting code can change and evolve over time
depending on the usage.
In order to be aware of the latest evolutions, please refer
to our website www.inemotion.com
LED INFLATOR (IN&BOX IN AIRBAG PRODUCT)
Solid green:
Inflator full and connected
Solid red:
Inflator not connected
No light:
In&box off
(airbag not functional)
(airbag functional)
(airbag not functional)
33
EN