JNF IN.27.106 Manual De Instalación página 16

EN
RESET
1
2 SECONDS
Keep pressing RESET
button [RESET button
is at the back panel
near the battery case],
when you see the
GREEN LIGHT, please
release the RESET
button.
5
NOTE:
The lock leave factory or after resetting will create a temporary password 11111111. After adding MASTER
USER PASSWORD, the temporary password will be deleted.
Manual de instalação / Installation Manual / Manual de instalación
2
Wait for 3
seconds, the GREEN
LIGHT will flash, it
means reset
successfully.
3
The RESET
button has timeout
detection function,
if you keep pressing
more than 5 seconds
(GREEN LIGHT will
turn off), the reset
operation will fail.
If after inputting correct password, the RED
LIGHT and the BLUE LIGHT flash alternately,
it means the deadbolt is at popup state.
If the RED LIGHT flashes ceaselessly, it means
the latch can't popup completely.
- MI242-3
4
If the lock is in factory
mode without any
configuration it will
emit an alarm when
the display is activated.
After configuring the
user the alarm will be
disable.
www.jnf.pt
16/30