Removing The Bottom Cover - Gigabyte BRIX Extreme Ultra Compact PC Kit Guia De Inicio Rapido

3-1

Removing the Bottom Cover

Before you remove the bottom cover
• Make sure the system is not turned on or connected to AC power.
Follow these instructions to remove/install the Bottom Cover:
1. Remove the screw securing the chassis side cover.
取下M.2 SSD A 插槽螺絲孔上的螺絲及預裝好的散熱片。)
(
2. Slide the cover towards the rear of the system and then remove the cover in the direction indicated
by the arrow.
取下M.2 SSD A 插槽螺絲孔上的螺絲及預裝好的散熱片。)
(
2
System Hardware Installation
- 28 -
1