Using Your Ceiling Fan - Beacon Lighting LUCCI AIRFUSION MOTO Manual De Instrucciones

AIRFUSION MOTO Installation Instructions
INSTALLING THE TRANSMITTER HOLDER (Fig.14)
Install the holder (A) to the wall with two screws provided (B), hang up the transmitter by the holder.
REMOTE CONTROL (Fig.15)
1. Open the battery compartment cover by removing the securing screw and insert 2 x AAA battery. Note the
correct battery polarity (+/-) when inserting the battery, and then replace the cover and secure with the screw.
2. Test the remote by pressing and hold any button. A red LED will be lit up at the top of the remote to indicate
that there is power to the remote and it is ready for use to control the fan.
3. Follow the guide below to operate the fan and learn the functions.
7 | P a g e
Fig. 14

USING YOUR CEILING FAN

Fig. 15