HTW SETA Manual Del Usuario página 33

Tools needed:
10 and 13 mm open-end spanners
Adjustable opening spanner (2) 20 cm long
Slip-joint pliers 23 cm long Philips screwdriver with medium
blade
Spray bottle of soap solution for leak proofing
Parts supplied:
Support with LPG cylinder housing and 3-post brackets.
9 cup nuts (M6 mm), 9 small bolts (M6 x 10 mm), 9 small flat washers (Ø 6 mm) for
reflector assembly.
6 large bolts and flange nuts (M6) for support legs / main pole assembly.
3 medium bolts (M8 x 15 mm) for support legs / support assembly.
3 reflector spacers and wing nuts, 9 large flat washers for reflector and burner
assembly.
3 piece ground clamp
6 x M6 x 10 mm ground fixing bolts and nuts.
ASSEMBLY PARTS
11