Installation Requirements; Tools Needed; Parts Supplied; Location Requirements - Haier DD410RS Instrucciones De Instalación Y Manual Del Usuario

INSTALLATION REQUIREMENTS

TOOLS NEEDED

Phillips Screwdriver
Measuring Tape
Carpenter's Level

LOCATION REQUIREMENTS

WARNING
Keep flammable materials and vapors, such as gasoline, away from
appliance.
Failure to do so can result in death, explosion or fire.
IMPORTANT: This dual-drawer refrigerator is designed for built-in use
only. Before use, this dual-drawer refrigerator must be installed properly.
NOTE: Allow the dual drawer to sit upright on its base for at least one hour
before installation.
• Do not install the dual-drawer refrigerator where the temperature will
go below 55°F (13°C) because it will not run often enough to maintain
proper temperatures.
• Do not install the dual-drawer refrigerator where the temperature will
go above 110°F (43°C) because it will not perform properly.
• Install it on a floor strong enough to support it fully loaded.
• Do not install the dual-drawer refrigerator in a location exposed to
water (rain, etc.) or direct sunlight.
DUAL-DRAWER REFRIGERATOR DIMENSIONS
(60.6 cm)
(86.0 cm)
49-60810
EXPLOSION HAZARD and FIRE HAZARD
(60.3 cm)

PARTS SUPPLIED

Anti-tip Brackets
Screws
(105.2 cm)
7