Lionelo Riya Manual Del Usuario página 12

How to assemble and disassemble front wheels
7.
Slide wheel shank into corresponding holes on stroller frame (fig. 3).
8.
To remove front wheels, press the release key (6) and pull the wheels out.
How to assemble and disassemble rear wheels
9.
Slide wheel shank into corresponding holes on stroller frame (fig. 4).
10. To remove rear wheels, press the release key (12) and pull the wheels out.
How to adjust a handle
11. Press the handle adjustment key (2) and pull the handle out or slide it in by
choosing one of three available heights (fig. 5).
How to fold stroller frame in forward-facing position
12. Fold the sunshade (fig. 6a), tilt the backrest to the front, fold the footrest as
showed by the arrow no. 3 (fig. 6b), next press the handle adjustment key
with one hand and lock key with the other, and fold the stroller as showed
by the arrow no. 5 (fig. 6c).
13. Dynamically lower the handle as far as you can (fig. 6d). Make sure the
folding lock is engaged.
How to fold stroller frame in a rear-facing position
14. Fold the backrest to the back (fig. 7a). Next, follow steps of folding the
stroller in a forward-facing position analogically (fig. 7b, 7c). Make sure the
folding lock is engaged.
How to use a harness
15. Safety belts adjustment: insert belts into the central buckle until you can hear
a click (fig. 8). To remove belts, press the key in the central buckle (fig. 9).
16. To adjust length of belts, pull them through relevant loops in the seat so that
they correspond to child's height (fig. 10).
Swivel wheel lock key
17. Front rotating wheels: to unlock the right wheel, dynamically slide the interlock
key (14) to the right (fig. 11). To lock it, slide the interlock key to the left (fig. 12). To
unlock and lock the left wheel, take the above-stated actions in a reversed order.
EN ‑ 12 ‑