Lionelo Riya Manual Del Usuario página 14

How to assemble and disassemble child safety seat
(applies to 3in1 set)
Connectors are compatible with these products: Lionelo (Astrid, Mari Carrier,
Greet Carrier)
32. Insert connectors into corresponding spots on the stroller frame until you
can hear a click, and connectors are locked (fig. 26). Pay attention to R and
L marking.
33. Insert the child safety seat into the stroller frames until you can hear a click
and connectors are locked (fig. 27). Make sure the child safety seat has been
properly mounted on the frame.
34. To detach the child safety seat, press child safety seat keys and then take
the product from the connectors (fig. 28).
35. When placing the child safety seat in the stroller frame, make sure the child
is facing the person who handles the stroller.
How to clean and maintain
1.
Clean the dust and sand off the wheels and stroller frame on a regular basis.
You can clean these parts with a wet cloth.
2.
Wash the upholstery of the stroller and its basket manually at the temperature
of 30ºC. Do not dry mechanically.
3.
Wash the upholstery of the carrycot and cover manually at the temperature
of 30ºC. Do not dry mechanically.
4.
You should regularly inspect particular parts of the stroller for their correct
operation, resistance and potential damage. In case of any defects, please
contact the authorized service center.
5.
Use spare parts recommended by the manufacturer only.
6.
Make sure the stroller is not directly exposed to sunlight and high temperatures
for a long time. Sunlight may cause the fabrics to fade.
7.
Do not use strong chemicals to clean this product.
The pictures are for reference only. The real design of the products may differ from the
EN
pictures presented.
‑ 14 ‑