Publicidad
Idiomas disponibles
Idiomas disponibles
•
Switch the unit on and switch it to CD mode with SOURCE Button.
•
Open the CD tray by pressing the upper left corner („Open/Close") and insert a CD with the top facing you.
•
The CD will play as soon as the device has read the contents. This may take a few seconds.
Repeat and random mode
•
Press PLAY MODE on the remote control to select REPEAT1 (plays the current track in a loop), REPEAT ALL (plays the entire
CD in a loop) or RANDOM (plays the tracks on the CD in random order). A logo is displayed in the top right
the display.
•
Press PLAY MODE again to return to normal play mode.
Programmed play (Playlist)
You can choose up to 32 selections for playback in the order you like. NOTE: Program can only be set in STOP mode.
•
While in stop mode, press MEMORY on the remote control to enter the programming mode.
•
Press [
] Or [
] on the remote control to select the desired track.
•
Press MEMORY to save the track number.
•
Repeat for other tracks. Up to 32 tracks can be programmed. If you want to check the programmed tracks, press the
MEMORY button repeatedly.
•
Press the play button to start playback.
Folder mode
1.
Select USB mode using SOURCE button on the unit or the remote control.
2.
Connect a USB mass storage device (USB stick, MP3 player) that contains MP3 files, this will take a few seconds.
3.
Use the FOLDER button on the remote control to switch to FOLDER mode, "FOLD" will appear in the display.
4.
Use the left/right arrow key on the remote control to select the desired folder that already stored in the USB device.
5.
Navigate with BACK or FORWARD or PLAY/PAUSE button on the unit or on the remote control.
BT wireless technology is a short-range radio technology that enables wireless communication between various types of digital
devices, such as mobile phone or computer. It operates within a range of about 10 meters.
Pairing with BT devices:
Press the ON/STAND-BY button to turn the power on.
Press the SOURCE button (remote control or unit) to select BT function.
("----" flashes)
Perform pairing procedure on the source device to detect this unit. "Audizio Nimes" will appear in the detected devices list (if
available) in the source device. (Refer the source device operating manual for details).
Notes
Place the devices to be paired within 1 meter (3 feet) of each other when pairing.
Select "Audizio Nimes" from the source list. If Passcode* is required, enter "0000". Passcode may be called PIN Code, Passkey, PIN number or
Password.
indicator (conn) will appearonce
Pairing
unit.) Some audio source devices may connect with the unit
automatically after pairing is completed, otherwise follow the instructions in the source device operating manual to start
connection
MUTE
The Volume is muted temporarily when pressing the MUTE button on the remote control. Press
again to restore the volume.
X-BASS
When the power is first turned on, the unit will enter the extra bass mode which emphasizes the bass frequencies, and "X-
BASS" indicator will appear. To cancel the extra bass mode, press the X-BASS button on the remote control.
EQ
When the EQ button on the remote control, the current mode setting will be displayed. To change to a different mode, press
the EQ MODE button repeatedly until the desired sound mode appears ("CLASSIC, POPS, JAZZ, ROCK").
the unit is successfully paired with the source device.(Pairing information is now memorized in the
6
corner of
Publicidad
