Put the heater on a flat, dry and clean surface.
Install the rollers as shown on the below drawing.
Warning: Always use your appliance with fixed
rollers.
Leave a minimum distance of 1m between any
side of your appliance and any obstacle (furniture
or walls, for example) to allow a good circulation
of the airflow.
Always direct the airflow in order to optimize the
heating of the room.
Avoid the corners, small volumes, wood floors,
ceiling, etc...
Warning: If this appliance is used in a bathroom, it
shall be placed out of the zones 1 and 2, at a
minimum of 60 cm from any bathtub or shower,
as stated in the French standard NF C 15-100 for
electrical installation inside the house.
29