How To Use - Haverland HE10EPAT Manual De Instrucciones

How to use

1. ON / OFF
Press the switch button on the right side to turn the appliance.
2. Light
The red light between the two knobs lights up when the device is heating.
6
4 5
MODE
LIGHT TEMPERATURE
SETTING
SELECTION
3. Mode selection knob
Please note that the temperature can only be adjusted under COMFORT MODE.
Comfort Mode
Under Comfort Mode, you can set your desired temperature between 5°C to 35°C with
the Temperature Setting Knob (see Figure 1). There are 9 graduations on the temperature
Setting Knob from 1 to 9 which define the temperature from 5 ° C to 35 ° C (at "1" the
temperature will be maintained at around 5 ° C, while at "9", the temperature will be
maintained at around 35 ° C). The product has a built-in thermostat, when ambient
temperature is below the set temperature, the heater will start to function and the red
indicator light illuminate. When the ambient temperature is higher than the set temperature,
the heater will stop operating temporarily and the red indicator light will be switched off.
ECO Mode
ECO maintains a temperature 3.5ºC lower than the selected Comfort temperature.
Mode Anti-freeze
The appliance maintains the temperature around 7°C.
Mode Standby
The appliance doesn't work on this mode unless the power is on.
31