DO NOT:
Use this component if you think it is damaged or anything appears unusual.
Open/modify this component; inaccuracy and/or harmful injury may result.
Conduct many frequent measurements as this may result in harmful injury
due to blood flow interference.
Place the cuff over a wound as this may cause further injury.
Place and pressurize the cuff over/near any present intravascular access
or therapy, or arteriovenous shunt, as this may cause blood flow interfer-
ence and result in harmful injury.
Place and pressurize the cuff over a limb near the side of a mastectomy
as this may cause harmful injury.
Use this component on a limb simultaneously with other medical equipment
on the same limb due to possible interference with such medical equipment.
Maintain pressure in the cuff applied to the limb for a prolonged amount
of time. Ensure that circulation in the limb is not impaired by checking cir-
culation if prolonged/repeated exposure to pressure occurs.
CAUTION – Potentially hazardous situation that if not avoided
may result in minor/moderate injury, property damage, and/or
damage to the component
• To avoid inaccurate measurements and to lessen any discomfort from cuff
pressure, ensure the cuff is placed correctly on the limb and fits correctly
when snug (not tight), as indicated by markings on the cuff.
DO NOT:
Use this component outside of its specified operation temperature and
humidity rating, or if stored outside of its specified storage temperature
and humidity rating. Avoid storage in direct sunlight.
STANDARDS:
In addition to the standards stated in the Instruction Manual:
• Clinical Testing per standard ISO 81060-2:2013 was conducted on blood
pressure component using the same measurement technology.
TYPE:
Inflation Mode Technology
EXPECTED LIFE:
Cuff: 2 Years or 10,000 uses (whichever comes first)
2