Error Codes And Flashing Sequences - HomeMatic IP HmIP-FWI Manual De Instalacion Y Uso

6.3

Error codes and flashing sequences

Flashing code
Short orange
flashing
1x long green
lighting
1x long red
flash
Short orange
flashing (every
10 s)
6x long red
flashes
1x orange and
1x green flash
(after connect-
ing the power
supply)
Meaning
Radio transmission/
attempting to transmit/
data transmission
Transmission con-
firmed
Transmission failed
or duty cycle limit
reached
Pairing mode active
Device defective
Test display
Solution
Wait until the transmission is
completed.
You can continue operation.
Please try again (see „6.1
Command not confirmed"
on page 28 or see „6.2
Duty cycle" on page 28).
Enter the last four numbers
of the device serial number
to confirm (see see „5.4 Pair-
ing" on page 26).
Please see your app for error
message or contact your
retailer.
You can continue once the
test display has stopped.
Troubleshooting
29