Warning Symbol Identification; Using The Power Management System; Power Management System - Ingersoll Rand 2135Ti Manual De Instrucciones

All manuals and user guides at all-guides.com
•
Impact Wrenches are not torque wrenches. Connections
requiring specific torque must be checked with a torque
meter after fitting with an impact wrench.
The use of other than genuine Ingersoll-Rand replacement parts may result in safety hazards, decreased tool
performance, and increased maintenance, and may invalidate all warranties.
Repairs should be made only by authorized trained personnel. Consult your nearest Ingersoll-Rand Authorized
Servicenter.
WARNING
Always wear eye protection
when operating or performing
maintenance on this tool.

USING THE POWER MANAGEMENT SYSTEM

Impact Wrenches are not torque wrenches. Connections
requiring specific torque must be checked with a torque
meter after fitting with an impact wrench.

POWER MANAGEMENT SYSTEM

POWER SETTING INDICATORS
MINIMUM
Using the Tool (Continued)
•
Periodically check the drive end of the tool to make cer-
tain that the socket retainer functions correctly, and that
sockets and drive ends are not excessively worn which
may allow the socket to come off when rotating.

WARNING SYMBOL IDENTIFICATION

WARNING
Read this manual before
operating tool.
The 2135Ti series of Impact Wrenches incorporates a Power
Management System that allows the operator to select four
power output settings. These settings range from minimum
power output through maximum power output in the clock-
wise direction only. The Air Wrench will always operate
at maximum power output in the counterclockwise direction,
no matter what power output level is selected. The four
power setting indicators of increasing size on the rear of
the housing indicate increasing power output levels, are for
reference only and DO NOT denote a specific power output.
The smallest power setting indicator designates minimum
MAXIMUM
power output, the two middle power setting indicators
denote medium power outputs and the largest power setting
POWER
indicator denotes maximum power output. The power output
REGULATOR
can be further reduced in clockwise or counterclockwise by
using the variable throttle. Air supply systems which do not
deliver adequate air pressure can affect power output at all
settings.
(Dwg. TP2081)
2
WARNING
Always wear hearing
protection when operating
this tool.