Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
AIR Control
By pressing Lock
and Send
again, the radiator
or heated towel rail keypad lock will be disabled.The
Lock symbol
will disappear on the radiator display.
WARNING, JUST IN THE EVENT OF THE REMOTE
CONTROL NOT WORKING: You can disable the
keyboard lock in the radiator or towel heater by
pressing the temperature selection buttons (
and
at the same time) for 15 seconds. The radiator, towel
rail or water heater will reset and you will lose any
programmation stored in it.
2.8.Screen brightness
You can change the brightness of the screen by
pushing the button
for 5 seconds. Entering this
mode you will see the following screen:
You can increase or decrease the brightness of the
screen by using the
and
buttons.
2.9.Effective Power
The
effective
power
represents
the
actual
consumption of the radiator compared to the nominal
power established by the manufacturer. To see this
value, push the button
for 5 seconds followed by
the Send
button. Then the following screen will
appear where you will see both the effective and
nominal power of the radiator:
12
Publicidad
Capítulos
Tabla de contenido
