Oreck AIR RESPONSE WK16000 Manual Del Usuario página 2

OPERATING
AIR RESPONSE
™
Power On / Off
Remove all plastic and packaging from the unit
and filters prior to operating.
SPEED
Manual Mode: To Manually Adjust Fan Speed
Press "Speed" until desired fan setting is reached.
1 2 3
LOW MEDIUM
The Air Quality Indicator Bar will remain blue in
manual mode.
AUTO
DustSense™ Technology
Press "Auto" to activate DustSense™ Technology
which will automatically adjust the fan speed
based on the amount of particles in the air.
Unit defaults to Auto Mode when turned on.
GOOD - Blue
MODERATE - Purple
P O O R - R e d
Air Quality Indicator Bar
Lets you know it's working by changing colors
depending on the amount of particles in the air.
Air Quality Indicator Bar is activated only in "Auto
Mode." In manual mode, the Air Quality Indicator
Bar will remain blue.
LIGHT
Lights On / Off
Press "Light, " to dim display panel and turn off
the Air Quality Indicator Bar for less interruptions
at night.
Operating selections will not be affected.
HIGH
TIMER
Sleep Timer
Press "Timer" to select 2, 4, or 8 hours. Once
selected the unit will turn off after time runs out.
To cancel sleep timer, tap until number
disappears.
MAINTENANCE
Odor Filter Indicator
Indicator light will illuminate to remind you
to change the Odor filter. Light will appear
approximately every 6 months based on 12 hours
of use per day. This may happen more frequently
depending on usage.
After replacing the filter, don't forget to reset the
filter indicator.
HEPA Media Filter Indicator
Indicator light will illuminate to remind you to
change the HEPA Media filter. Light will appear
approximately every 12 months based on 12
hours of use per day. This may happen more
frequently depending on usage.
After replacing the filter, don't forget to reset the
filter indicator.
REPLACEMENT FILTER GUIDE
Air Response™ Size Filter Replacement Kit*
Small Type B1
(Model# WK16000) (Model# AK46000)
Medium Type B2
(Model# WK16001) (Model# AK46001)
Large Type B3
(Model# WK16002) (Model# AK46002)
*Filter Replacement Kit includes:
(1) HEPA Media filter and (2) Odor filters.
IMPORTANT!
Only certified Oreck® accessories, parts and
filters should be used with this product.
Please call 1-800-989-3535 (U.S.) or 1-888-
676-7325 (Canada) or visit Oreck.com for reorder
information.
CAUTION: TO REDUCE THE RISK OF INJURY FROM
MOVING PARTS - UNPLUG BEFORE CLEANING AND
SERVICING. IMPORTANT! THE FILTERS ARE NOT
WASHABLE.
REPLACING THE ODOR FILTER
1.
Remove cover
2.
Remove & replace with new Odor filter
3.
Replace cover
After filter is replaced, press indicator light for 4
seconds to reset. Icon will disappear.
Odor and HEPA Media filters may not need to be
replaced at the same time. Replace according to
indicator light.
Remove any plastic coverings from new filter(s)
before installing.
REPLACING THE HEPA MEDIA
FILTER
1.
Remove cover
2.
Remove & replace with new HEPA Media filter