All manuals and user guides at all-guides.com
IMPORTANT SAFEGUARDS
When using your appliance, basic safety precautions should always
be followed, including the following:
1. READ ALL INSTRUCTIONS
2. Use the iron only for its intended use.
3. Check that your mains voltage corresponds to that stated on the
appliance.
4. To protect against electrical shock do not immerse cord, plugs, or
iron in water or other liquid.
5. The temperature dial and steam knob always be turned to 0/MIN
before plugging or unplugging from the outlet. Never yank the
cord to disconnect form the outlet; instead, grasp the plug and
pull to disconnect.
6. Do not allow the cord to touch the hot surfaces. Let the iron cool
down completely before putting away. Loop the cord loosely
around the iron when storing.
7. Always disconnect the iron from the electrical outlet when filling
with water or emptying and when not in use.
8. Do not operate the iron with a damaged cord or plug or after the
appliance has been dropped or damaged in any manner. To
avoid the risk of electric shock, do not disassemble the iron, take
it to a qualified serviceman for examination and repair. Incorrect
reassembly can cause a risk of electric shock when the iron is
used.
9. Close supervision is necessary when the appliance is used by or
near children.
10. Burns can occur from touching hot metal parts, hot water or
steam. Use caution when you turn a steam iron upside down –
there may be hot water in the water tank.
11. If the iron is not operating normally, disconnect form the power
supply and have the iron serviced by an authorized service
center.
2
USK DA 1 - 051107