Daspi DS010 SX MULTI Manual página 5

4 CHANNELS
For programming , press the chosen configuration as shown above for 5
seconds, the remote will flash 3 times with the number of channels
selected, confirming that it is correctly programmed.
3. DIP ACCESS:
For accessing the DIPs is neccessary to unscrew the rear case. Once this
is done, remove it carefully, to have access to the DIPs. See the image
below:
All manuals and user guides at all-guides.com
DS010 SX MULTI
Table 1: Channel selection.
8 CHANNELS
U
12 CHANNELS
Unscrew t he b utton f rom t he
bottom c ase.