Setting Frequencies; Test All Functions - beautyrest NUFLEX Manual Del Usuario

Setting Frequencies

Back of Remote
There are several different frequency options to choose from for independent control of multiple bed
bases in the same area.
To set frequencies, unplug the power cord from the power source. Match the frequency switches on the
remote with the switches on the control box (it helps to reference the switch positions as "towards" the
numbers or "away" from the numbers). Reconnect the power cord back to the electrical outlet and press the
reset button located directly next to the frequencies on the control box.
Important: Make sure the base is unplugged from power source before setting frequencies.
Note: If simultaneous operation of two beds is desired, match the frequencies on both remotes and control boxes.
8
Control Box
Frequency Switches

Test All Functions

To ensure proper setup, use remote and test all functions
for 3 seconds.

Head Motor

Foot Motor

Head Massage (3 speeds)
Reset Button

Foot Massage (3 speeds)

Zero Gravity

Reading

Recline

Flat
9