Extremis Sol+Luna Borealis Instrucciones De Montaje página 17

Sunbrella fabric
Daily maintenance:
1. Shake or brush off loose dirt immediately.
2. Make a mixture of 15 ml gentle detergent per litre
of lukewarm water (max 40°C).
3. Use a sponge or soft brush.
4. Let the suds soak in for a moment.
5. Rinse thoroughly to remove all soap residue.
6. Simply allow to dry. Sunbrella dries very quickly.
It is also possible to wash the cushion cover in
a washing machine (max 40°C). Never put the
cushion covers in the tumble drier!
Creases can be ironed out if desired. Always set
your iron to the synthetic fabric settings to do this.
Test a small, inconspicuous area of the fabric before
ironing it all over. NEVER use steam.
Tips for stubborn stains or mould:
1. Make a mixture of 60 ml bleach and 15 ml gentle
detergent per litre of lukewarm water. TIP: protect
the surroundings where you are cleaning. The
bleach can affect the colour of other, non-Sunbrel-
la fabrics and can have a harmful effect on nature
and the environment. So we advise you not to use
it near water or natural surroundings that could be
damaged by the bleach.
2. Spray the suds onto the entire Sunbrella item and
let it soak in for 15 minutes.
3. Remove stains with a sponge of soft brush.
4. Rinse thoroughly to remove all soap residue.
Simply allow to dry.
For more information about caring for your Sunbrel-
la fabrics, see www.sunbrella.com
HPL tabletop
High Pressure Laminate, to be cleaned with standard
detergents such as those you use in the kitchen. For
stubborn dirt, we use "HG plastic, paint and wallp-
aper intensive cleaner". More info: www.hginternati-
onal.com
Stainless steel table support
Stainless steel is not resistant to sea water. Especi-
ally in an aggressive environment (maritime climate,
chlorine, acid rain, aggressive industrial or urban
surroundings), we advise you to clean the surface
regularly. Suitable products for cleaning stainless
steel are widely available.
MiraClean sponge
Only use the MiraClean sponge when normal cle-
aning with lukewarm water, gentle soap and a soft
All manuals and user guides at all-guides.com
sponge is insufficient.
If stubborn stains are still visible after cleaning
(see product manual), these may be removed with
the sponges supplied. Moisten the sponge a little
with ordinary water and rub it over the stains to be
cleaned. Do not rub too hard, as this could cause
matt patches.
There is no need to use detergents. Water alone is
sufficient.
The MiraClean is made of melamine resin and wears
away with use. The sponge is very easy to use and
works up to 26 times more quickly than a traditio-
nal microfibre cloth. The sponge removes the most
stubborn stains with no extra effort.
Do not use on shiny surfaces.
The MiraClean scouring sponge is the solution for
removing stubborn stains such as felt tip, grease,
shoe streaks, limescale marks, coffee and tea. The
MiraClean can be used on tarpaulins, PVC, glass,
steel, chrome, aluminium, porcelain, artificial
leather and many types of floor.
For more information, contact Extremis at info@
extremis.be
English – 17