Publicidad
TO TURN OFF THE HEATER
1. Turn the variable control knob to PILOT position.
2. Press and turn the variable control knob to OFF position.
3.Turn off the valve on the gas supply cylinder completely.
Storage
1. Always close the gas valve of the gas cylinder after use or in case of a disturbance.
2. Remove the pressure controller and the hose.
3. Check the tighness of the gas valve and for damage. If you suspect damage, have it
changed by your gas dealer.
4. Never store liquid gas cylinder in a sub-terrain, or at places without adequate air ventilation.
•
Wipe off powder coated surfaces with soft, moist rag. Do not clean heater with cleaners that
CLEANING AND CARE
are combustible or corrosive.
• Wipe off powder coated surfaces with soft, moist rag. Do not clean heater with cleaners that are
•
Remove debris from the burner to keep it clean and safe for use.
combustible or corrosive.
•
Cover the burner unit with the optional protective cover when the heater is not in use.
• Remove debris from the burner to keep it clean and safe for use.
• Cover the burner unit with the optional protective cover when the heater is not in use.
PARTS AND SPECIFICATIONS
Reflector
Flame screen
Burner base
Air admittance fence
Gas valve controller
Base of control housing
Post
Tank housing
Post bracket
Stand
36
CLEANING AND CARE
PARTS AND SPECIFICATIONS
813 mm
Off
Igniter
445 mm
- 4 -
more before turning the knob to desired temperature position.
TO TURN OFF THE HEATER
1.Turn the variable control knob to PILOT position.
2.Press and turn the variable control knob to OFF position.
Variable control knob
Igniter
3.Turn off the valve on the gas supply cylinder completely.
Storage
1. Always close the gas valve of the gas cylinder after use or in case of
2. Remove the pressure controller and the hose.
3. Check the tighness of the gas valve and for damage. If you suspect d
4. Never store liquid gas cylinder in a sub-terrain, or at places without a
Off
Hi
lgniter
Publicidad
Capítulos
