Accessmatic OWL608 Manual De Usuario página 30

Owl
608
As Figure 4:
1) Insert the spindle onto the mortise.
2) Get the cable across the door plate
and back bottom plate.
3) Fix the back bottom plate and front
panel with two screws. ( Note: The
upper must toward to
bottom plate). The two on the bottom
plate must toward to the central of the
spindle.
As Figure 5:
1) Connect the front panel cable with
the connect on the back panel.
2) Fix the back panel on to the back
bottom plate with 4 screws. (Note:
make sure the knob is vertical).
As Figure 6:
1) Put the batteries correctly and x the
battery cover.
Figure 7:
1) Fix the strike box on the door frame,
and then x the strike plate with 4
screws on the door frame.
Opening your life
on the
6