Check Points After Installation - Accessmatic OWL608 Manual De Usuario

Owl
608
Opening your life

8) Check points after installation

1) The face plate is horizontal with the door.
2) the latch bolt, dead bolt and security bolt must works smoothly and exibly.
3)The front lock is vertical and stable.
4) Front hadle works smoothly and exibly. Dead bolt should be in position
when you lift the handle.
5) Dead bolt should be in position when you lift the back handle, and it should
be retracted when you press the handle.
6) Knob turns smoothly and exibly, and security bolt reaches out or retracts
should be together with the knob´s action.
Intelligent lock( ve in one) operation manual
1)Function and Operation
Description of terms and functional keys
a) Adminstrator information: refer to the Administrator's ngerprint, password
or IC card.
Unlock information: refer to the input ngerprint, password ,Remote control or
IC card information (including Administrator and ordinary users).
b) Key"*": clear key/back key. Enter the password or point by clearing the
previous input.Press the clear key three times in succession, empty all input.
c) Key"#": con rmation key or menu function key.
2) Original state
a) The factory administrator orinitial password is 123456, under the orinitial
state any ngerprint, IC card or password can open the lock.
b) Any ngerprint, IC card ,or password which are not registered can't open the
lock after inputting the administrator information.
3) Lock function management (step one)
7