WAGNER TESSIN Modo De Empleo página 8

GB
Congratulations on the purchase of your WAGNER TESSIN. Read the operating
instructions carefully before using the equipment and observe the safety instructions.
Keep the operating instructions in a safe place.
NOTE:
The TESSIN is weather-proof and should be used in direct sunlight. Install
the TESSIN in such a way that the solar module is exposed to as much
sunlight
he TESSIN is equipped with an NiCd rechargeable battery. This
battery is supplied uncharged. Before using for the first time, charge the
battery for two days in direct sunlight in order to achieve maximum power.
For this first charging, the main switch must be set to „OFF"
Solar panel
Size
Output with full irradiation
Rechargeable battery (2)
Voltage
Charging capacity
Lamp element
Power input
Light duration
ASSEMBLY
Remove the TESSIN and accessories carefully from the box. (Figure A)
CAUTION! Do not exert pressure on the solar panel, as this may
cause damage to the solar module!
Contact with hidden cables can result in serious injury or
even death! When digging and drilling holes, make sure that
you do not come into contact with hidden cables.
INSTALLATION
Choose a site for installation with as much irradiation as possible. Do not place the
TESSIN in the shade of trees, bushes or buildings, as this will greatly reduce the
degree of efficiency of the TESSIN.
4
All manuals and user guides at all-guides.com
Operating I I nstructions
as possible in
Technical data TESSIN
order to ensure
TESSIN
maximum efficiency.
.
Mono crystal
approx. 5000 mm²
approx. 0,286 W
NiCd
2 x 1,2 V DC
600 mAh
2 LED
45 mW
max. 8 h