JMA TPH CLONER Manual De Instrucciones página 22

Warning!!! cause
E0
solution
Fail cause
Press RD
or CP
solution
after display number13 (reusing a tPh)
DISPlAY
No Chip cause
Press RD
or CP
solution
Wrong key
cause
Press RD
or CP
solution
Error !!!
cause
F8
solution
Error !!! cause
F3
solution
Fail cause
Press RD
solution
or CP
22
transponder inserted not 100% com-
patible with PcF7936 (tP12).
Press read to reinsert tPh.
Press coPY to continue with copy
Press both (read/coPY) to quit.
P3 record write failure P3. Final
step.
change tPh.
DESCRIPTION
transponder not responding, unk-
nown tP.
adjust position of tP on antenna,
insert tP again.
transponder detected that is not
tPh.
insert another tPh.
Failure to erase memory
change tPh.
P3 record write failure.
change tPh.
P0 record write failure. Final step.
change tPh.
all the error and warning codes that may appear during the cloning pro-
cess are summarised below:
ERROR DESCRIPTION
F0 read/write P0 error
F1 read/write P1 error
F2 read/write P2 error
F3
read/write P3 error
F4 read/write P4 error
F5
read/write P5 error
F6 read/write P6 error
F7 read/write P7 error
F8 delete all errores
F9 read P0, P1, P2 error
FA uid coMParatiVe error between Master KeY and
caPture tPh
FB all data caPtured in Password Mode incorrect
FC all data caPtured in crYPto Mode incorrect
FD cannot read all data FroM Master KeY
FE Master KeY data length not 32 bits
FF
cannot read data FroM Master KeY
FG cannot start decrYPtion Process
Fh
Micro sd 0 card Failure
FI Micro sd 1 card Failure
FJ Micro sd 0, 1 card Failure
FK Micro sd 2 card Failure
Fl Micro sd 0, 2 card Failure
FM Micro sd 1,2 card Failure
FN Micro sd 0, 1, 2 card Failure
WARNING DESCRIPTION
E0 not 100% coMPatible with PcF7936 (tP12)