Cleaning And Maintenance - ECRON HB1902-B Manual De Usuario

CLEANING AND
MAINTENANCE
Unplug the blender from the
power supply before cleaning.
· Clean the removable arm under
the tap. Do not use detergents or
abrasive cleaners. Once clean,
turn it upside down so that the
water trapped inside the shaft can
escape. If needed, the removable
arm can be used in dishwashers.
Note: do not submerge the
removable arm in water as this
could affect the lubrication in the
bearings.
TECHNICAL SPECIFICATIONS
MODEL
Power
Measuring beaker maximum capacity
Voltage
· Clean the measuring beaker with
warm water and soap.
· Clean the motor body with a soft
damp cloth. Never submerge the
body in water or any other type
of liquid.
· Leave all parts to dry completely
after cleaning them.
1
Caution: the blades are very sharp.
Take care when cleaning them.
For a quick clean between uses,
place the blender arm into the
measuring beaker, which is
half-filled with water, and switch it
on for a few seconds.
HB1902-B
300 W
500 ml
220-240
V ~ 50 Hz
EN
21