Hitachi CP-AW2519N Manual De Usuario página 256

Guía de funcionamiento
Ocultar thumbs Ver también para CP-AW2519N:
Tabla de contenido

Publicidad

PJLink command (continued)
Commands
Control Description
ERST ?
Error Status inquiry
LAMP ?
Lamp Status inquiry
INST ?
Input Source List inquiry
NAME ?
Projector Name inquiry
Manufucturer's Name
INF1 ?
INF2 ?
Model Name inquiry
INFO ?
Other Information inquiry
CLSS ?
Class Information inquiry 1
NOTE • The password used in PJLink
the Web Brouwser Comtrol. To use PJLink
any password in Web Browser Control.
• For specifications of PJLink
Machine and Information System Industries Association.
URL: http://pjlink.jbmia.or.jp/
1st byte: Refers to Fan error; one of 0 to 2
2nd byte: Refers to Lamp error; one of 0 to 2
3rd byte: Refers to Temptrature error; one of 0 to
2
4th byte: Refers to Cover error; one of 0 to 2
5th byte: Refers to Filter error; one of 0 to 2
6th byte: Refers to Other error; one of 0 to 2
The mearning of 0 to 2 is as given below
0 = Error is not detected; 1 = Warning; 2 =
Error
1st number (digits 1 to 5): Lamp Time
2nd number : 0 = Lamp off, 1 = Lamp on
11 12 22 23 31 41 51 52
Responds with the name set in "PROJECTOR
NAME" of "NETWORK"
HITACHI
inquiry
CP-AW2519N
Responds with the factory information and so
on
TM
, see the web site of the Japan Business
Parameter or Response
TM
is the same as the password set in
TM
without authentication, do not set
32

Publicidad

Tabla de contenido
loading

Tabla de contenido