Replacing The Fuse; Technical Specifications - Mark MINISCAN LED 60 Manual De Uso

EN

Replacing the fuse

If the fine-wire fused with fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Open the fuse holder on the rear panel with a fitting screwdriver.
Step 2: Remove the old fuse from the fuse holder.
Step 3: Install the new fuse in the fuse holder.
Step 4: Replace the fuse holder in the housing.
TROUBLESHOOTING

TECHNICAL SPECIFICATIONS

Power supply:110-250 AC 50/60 Hz
Power consumption: 95W
Light source: 1 pcs 60W high power white LED
Gobo wheel: 7 rotating gobo + white, gobo shake, bi-directional rotation
Color wheel: 8 color + white
FUSE 250V3A
DMX-control-channels: 9
DMX-512-connection: 3-pin XLR
Dimensions: 460x280x300 mm
Weight: 5 kgs
MINISCAN LED 60 - 5 -
User Manual/Manual de Uso