Warranty Conditions - Hama ATX-250W Manual De Instrucciones

All manuals and user guides at all-guides.com
00049171_72bda 12.09.02
Use the power supply only in dry rooms.
Lay all cables so that no-one can trip over them and
they cannot be damaged. Observe these instructions
when installing the power supply.
Take care that no metal objects (such as paper clips,
etc.) or liquids drop into the power supply (danger of
electric shocks and short circuits).
Inspect the power supply and its cables for damage
each time before you use it.
If you detect any damage, DO NOT CONNECT the
power supply to the mains voltage, since there is a risk
of a lethal electric shock!
Repairs may be carried out only by trained and quali-
fied persons.
Keep the power supply out of reach of children!
In business premises, observe the locally applicable
accident prevention regulations.
In schools, training facilities, hobby workshops, etc.,
the PC power supply may be used only when supervi-
sed by qualified persons.
Opening and/or removing the cover may expose compo-
nents carrying high voltages. The connectors may also
carry voltages.
Before installing or repairing the power supply or repla-
cing components, always disconnect it from the mains
voltage and unplug any other connectors.
Maintenance and repair of the power supply may be
carried out only by qualified persons or workshops who
are familiar with the dangers involved with such work
and the necessary safety precautions.
Take care that the power supply unit is correctly venti-
lated at all times. Never cover the ventilating holes.
Position the PC so that air can flow freely. Never, for
example, position the PC with its rear side close to a
wall or a fitment.
16:08 Uhr Seite 8
Technical data
• Supply voltage: 230 V/50 HZ
• Output voltages and currents:
+ 3.3 V
+ 5.0 V
+12.0 V
- 5.0 V
- 12,0 V
+ 5,0 VSB =
• ATX/AT design
• Output connectors: 5 x 5.25", 2 x 3.5",
1 x 4-pin connector and 1 x 6-pin connector for Pentium IV
(ATX only)
• ATX/AT connector for ATX/AT main board
• Power switch on rear
Dimensions:
(W x H x D) 15 x 8.5 x 14 cm

Warranty conditions

Hama products are of top-quality and are inspected in
accordance with the strictest international standards.
The warranty period begins on the date of purchase. The
warranty applies only to material and manufacturing
faults and does not cover consequential damages.
Warranty claims must be accompanied by proof of pur-
chase and a short description of the fault.
Pack the unit carefully to prevent damage and send it to
us with postage paid. A warranty repair does not extend
or restart the specified warranty period.
ATX-250W ATX-300W
= 3,3/14 A 0,2/16 A
= 25/17,8 A 30/19,5 A
= 8,0 A 11 A
= 0,3 A 0,3 A
= 0,8 A 0,8 A
2,0 A 2,0 A