Using The Auxiliary Input; Using The Bt Input - auna Buddy Manual De Instrucciones

USING THE AUXILIARY INPUT

Selecting the auxiliary input
1. Press the Source button select 'Auxiliary Input' .
2. On your auxiliary device, select the content that you want to listenwill
start to play the content that you selected on your auxiliary device.

USING THE BT INPUT

You can use BT to wirelessly connect to a device, such as a mobile phone
or tablet. You can then stream music from your mobile phone or tablet
through.
The first time you connect a BT device, you need to pair them. After you've
paired a device, remembers it for the next time.
Listening to a BT device.
1. Press the Source button the Select 'BT'.
2. On your BT device "Buddy", switch BT on and connect.
3. Select your favorite song, tap the ⏯ Button on your BT device or on the
"Buddy" to play or pause the song from your BT device.
4. Press the ⏭ Button or ⏮ Button to select the Next or Previous track.
5. If you want to pair (link) the "Buddy" with another BT device, press and
hold the Pairing
Button a few seconds. The "connected" will flash. The "Buddy" will go into
Pairing/Discoverable mode. Repeat steps 3 & 4.
Note: For more information, see your BT device's user manual. If you are
asked to enter a passcode, enter 0000.
Disconnecting a BT device
To disconnect a BT device, do one of the following:
• Press Source to switch to digital radio or FM radio.
• Switch off BT on the connected device.
EN
35