Setting Alarms And Timers - auna Buddy Manual De Instrucciones

EN
36

SETTING ALARMS AND TIMERS

You can set two alarms, which can tune to a radio station or sound atone.
Note: Alarms only sound when is switched on or in standby mode, and
connected to a power supply.
Alarms do not sound when is switched off.
Setting an alarm
1. Press the alarm Button select 'Alarm 1' or 'Alarm 2'.
2. Press the Select dial to change the 'Alarm 1 wizard '
3. Pressing the Select dial, turn the dial to adjust the hours and minutes,
pressing Select to confirm each section.
4. Turn and press the Select dial to select 'Duration'. Turn and press the
Select to set the duration that the alarm will sound in minutes.
5. Turn and press the Select dial to select 'Source'. Turn and press the
Select dial to choose between 'Buzzer', 'FM' or 'DAB', then press the
Select dial to confirm.
6. If you've chosen 'Digital Radio' or 'FM' radio, turn and press the Select
dial to select 'Preset'. To play the station you last listened to, turn and
press the Select dial to select 'Last listened' or turn and press the Select
dial to choose a radio station from the preset list.
Note: Skip this step if you are setting a Tone alarm.
7. Turn and press the Select dial to select 'Daily'. 'once'.' weekends' or
'weekdays'.
8. Turn and press the Select dial to select 'Volume'. Turn and press the
Select the dial to set the volume of the alarm.
9. Turn and Press Select to turn 'Alarm' to 'On'.
10. Turn and Press Select to turn 'Alarm saved'.
Setting the sleep timer
1. Press hold the Menu Button for 2 seconds to view the main menu .
2. Turn and press the Select dial to select 'System' > 'Sleep'.
3. Turn and press the Select dial to adjust the length of the sleep timer.
Cancelling a sounding alarm
Press Standby to cancel any sounding alarm or press Source to cancel and
leave the radio on.