Backlight - auna Buddy Manual De Instrucciones

3. Turn and press the Select dial to select 'Yes' to reset factory settings.
Select 'No' if you do not want to reset your factory settings.

Backlight

You can adjust the duration that the screen is illuminated for and the
brightness of the screen when your.
Timeout
To adjust the duration of the screen backlight before dimming:
1. Press hold the Menu Button for 2 seconds to view the main menu ..
2. Turn and press the Select dial to choose 'System' > 'Backlight'.
3. Turn and press the Select dial to choose 'Timeout'.
4. Turn and press the Select dial to choose a timeout setting. To specify
that the backlight should always remain on, choose 'On'.
On level
1. Press hold the Menu Button for 2 seconds to view the main menu ..
2. Turn and press the Select dial to choose 'System' > 'Backlight'.
3. Turn and press the Select dial to choose 'On Level'.
4. Turn and press the Select dial to choose between 'High', 'Medium' or
'Low'.
Dim level
1. Press hold the Menu Button for 2 seconds to view the main menu.
2. Turn and press the Select dial to choose 'System' > 'Backlight'.
3. Turn and press the Select dial to choose 'Dim Level'.
4. Turn and press the Select dial to choose between 'High', 'Medium', 'Low'
or 'Off'.
DAB settings
Note: You can only see the DAB settings when you have selected 'DAB' as
the radio source.
Full scan
You can use the 'Full Scan' (auto tune) function to automatically scan for
new digital radio stations and
remove inactive ones.
EN
39