How Does It Work - cosori CO194-CW Manual Del Usuario

EN

How Does it Work?

1. Place the coffee warmer on a
flat, level surface.
2. Connect the AC/DC adapter to
the DC in-port on the warmer,
and plug the power cord into an
electrical outlet.
3. Press the power button to turn
on the warmer. The display will
flash the default temperature
of 85°C and will then begin to
heat up.
6
All manuals and user guides at all-guides.com
4. (Optional) You can program a custom
temperature using the '
buttons. The temperature can be
set anywhere from 25°C to 110°C
(77°F to 230°F). Once you have set
your desired temperature, the display
will flash 3 times and the warmer will
begin to heat up.
NOTE:
The temperature on the display shows
the temperature of the heating plate,
not the actual temperature of the liquid
in your cup. Please note that the actual
temperature of the liquid is affected
by the thickness of your cup. For best
results, use heat-safe cups that are
thin and have a flat bottom.
5. (Optional) To change temperature
units, press and hold '
simultaneously for 3 seconds. The
units will change from "°C" to "°F."
6. Place a heat-safe mug or
container of your choice directly
onto the heating surface.
7. Press the power button to turn off
the warmer when you are finished.
NOTE:
The coffee warmer will remember the
last temperature that it was set to
before being turned off. It will resume
the programmed temperature when it
is turned back on.
' and ' '
' and ' '