Product Setup - iOttie Aivo View Manual De Configuración

02 Product Setup
Follow the instructions below for a quick and
easy installation of the Aivo View Dash Cam.
There are two mounting options, dashboard
or windshield.
Dash Cam Setup
1. Clean the area where you plan to affix the
Magnetic Mounting Base.
*Ideal placement is behind the rear view mirror.
2. Remove the adhesive
covering of the base and
attach to the area that
you cleaned.
3. Press down firmly and hold
the base for 30 seconds.
4. Attach the Aivo View Dash
Cam to the base, with the
Camera Lens facing toward
the front of the car.
*Align the marking on the base of the Aivo View
so that it is opposite the Camera Lens. This ensures
a maximum range of camera angles.
5. Ensure that objects on the Dash Cam display
appear level, and adjust as required.
*To flip the image vertically—you need to turn the
Dash Cam off and back on.
*You can use the Live View (in the iOttie Connect App)
to guide you in making additional adjustments.
*The Magnetic Mounting Base is built for the Aivo
View Dash Cam to easily remove and remount.
Micro SD Card Insert
A Micro SD Card (class 10 with between 32–
128GB) is required for use with the Aivo View.
1. Remove the silicone cover
on the side of the Dash Cam
and insert a compatible Micro
SD Card.
2. Push until the card clicks
into place. You may use the
edge of a small coin or similar
object if necessary.
3. A second push inwards will
release the memory card.
11