Power Supply - iOttie Aivo View Manual De Configuración

Power Supply

To power your Aivo View Dash Cam
1. Connect the (12 ft) power cable to the Dash
Cam's Micro-USB Port.
2. Run the charging cable in the seam along
the passenger side door, ensuring that your
view is not obstructed and that the cable is not
a distraction. Secure the cable in place using
the included cable clips.
3. Connect the other end to the included
adaptor and plug it into your vehicle's 12V
power outlet, or you may also connect directly
to a USB-A outlet.
*The Dash Cam will automatically power on and start
recording once power is available. In some vehicles
this will be when it is plugged into the outlet, for
others the Dash Cam will power on once the ignition
has been turned on.
12 EN
CLIPS
Bluetooth Remote Button
The included Bluetooth
Remote Button is an additional
way to capture user videos
and photos with the push
of a button.
To mount the Bluetooth Remote Button,
1. Select a convenient space on your dash or
windshield for the Bluetooth Remote Button.
*We recommend placing it within easy reach from the
driver's seat.
2. Clean the intended mounting area.
3. Remove the adhesive from the back of the
button and firmly press the device onto the
space. Hold for 30 seconds to ensure the
button is securely placed.
4. Start pairing: push and hold the button for 10
seconds to pair.
Taking photos: push the button for 1 sec.
Recording video: push and hold the button
for 2 sec.
13