HOW TO USE THE KNEADING HOOK, FLAT BEATER & WHISK
TKG MCH 1002
Turn the release button (1) clockwise, while lifting
the swivel arm (12) with one hand so that it locks
into place with a ‚click'.
Fit the anti-splash llid (6) onto the swivel arm(12)
and turn it slightly clockwise, so that it locks into
position securely.
1.
Place the food into the mixing bowl(10).
1.
Fit the mixing bowl(10) into the housing.
2.
Turn the mixing bowl(10) slightly clockwise, so it
locks into position.
1.
Ensure the splash-guard (6) is fixed well.
2.
Fit the required accessory (7, 8 or 9) onto the
motor spindle (5) on the underside of the swivel
arm(12).
3.
Turn the accessory, so the pins on the spindle
are aligned with the hook inlets on the
accessory top edge. Press the accessory
against the swivel arm and turn it anti-
clockwise at the same time until the pins
engage and the accessory locks into position
securely. The accessory must not be loose, nor
should you be able to pull it free.
8