3. Drill the holes into the wall and place
the anchors.
Փ 6 mm
3x
4. Attach the wall support with the screws
and plastic anchors provided, making sure
it is straight and securely affixed to the
wall.
WARNING!
Before drilling in the wall,
make sure no water pipes or
electrical wires are behind. It is
recommended to use a ф
6mm drill bit. The filter
package includes three
dedicated screws and plastic
anchors to properly and
securely install the filter. The
provided fixation system is
designed for installation on a
brick wall. In case of doubt,
refer to the technician.
WARNING!
If your wall is made of different
material than brick, use the
proper anchors and screws
designed for that material.
ENGLISH
7