Qlima LK 5010 Instrucciones De Uso página 27

BRIEF INSTRUCTION OF FUNCTIONS
1. Refrigeration and cooling: An evaporator conforming to international envi-
ronmental protection standards is adopted with advanced cooling technology
of humidity and evaporation by medium- water,which evaporates quickly to
cool the air passing through the evaporator in a short time. In hot and arid
regions, the temperature drop in the wind zone is up to 6~12°C. Even in the
humid regions, the temperature drop in the wind zone is still up to 3~5°C.
2. Filtering: This unit can filter out the harmful tiny substances such as dust,
fibers, smoke, and etc. from the air output. Filtered clean air will bring you to
a feeling in neighborhood to a forest or seaside.
3. Damping: This unit has obvious effect of damping in a dry area or season. This
function can keep the indoor space in necessary humidify.
4. Selection of Air Flows: 3 speeds of air flow are provided on the unit to meet
your need.
5. Selection of Air Types: Three types of air flow can be selected to meet your
need. The types to be selected are: normal, natural wind and sleep mode.
6. Selection of Directions of Air Flows: This unit can blow under automatic swing
in range of continuous 120 degrees.
FUNCTIONS OF ALL BUTTONS
display panel
control panel
Function Instruction
Cooling function: using distributed spray technology, with a powerful water pump
to let water pass through the water curtain, and through an ice pad cooling down
the air, so as to reduce the temperature and humidification.
Negative ion function: the negative ion is formed by the negative ion generator
using pulse, oscillating circuit to produce high corona and oxygen molecule in the
air. In order to effectively manufacture reactive oxygen for sterilization, fresh air
and so on.
4
52
Remote control
(battery: 1 pc CR 2032)
E-Cooling function: A special semiconductor material forms the thermocouple to
produce the Peltier effect, which is a new type of refrigeration method. It keeps
cooling the water automatically in the tank to reduce the water temperature.
Sliding door design: modern design of sliding door when the unit is switched on
or off.
Function Operation
• Ensure the unit is in the (OFF) position before plugging into the mains power
socket.
• Place the unit on a firm level surface.
• Avoid overloading the circuit by not plugging other high wattage products
into the same mains power socket
Plug into the mains power socket, the power indicator lights up, the Device is on
power, and shows the temperature.
ON/OFF Press this button to turn on the unit at low speed
the temperature . The door of the unit slides down to the
bottom automatically.
Press it again to turn off the unit. The door of the unit slides up till
completely closing.
SPEED
Press this button to switch the unit between LOW
HI Speed, in normal mode.
SUPER
Press this button to turn to the max wind air.
Press it again to turn to original wind setting.
COOLER
When the unit is running by this function, the pump and the
E-cooling system is working at the same time. The water is
pumping from the water tank and flowing through the electronic
refrigeration cooling system (Called Semiconductor), and going
inside to the water curtain to achieve the effect of cooling.
Press this button again to turn off the function.
** For much better cooling effect, ice box or ice is recommended to
be put in the water tank.
Caution: there is water shortage warning, if the water is not
enough, the COOLER function will automatically stop, and 3 beeps
will be heard, and the display of the cooler will be blink.
.
, and display
– MID -
4
53